Discounts Available | Add to Cart for your Savings | Damos la bienvenida a hablantes de español | Authorized Dealer | B2B program
Regular Price: $4,413.00
Sale Price: $2,956.71
You save: 33% ($1,456.29 )
Goodman GLZS4BA6010 5 Ton 15.2 SEER2 R32 Heat Pump Condenser is backordered and will ship as soon as it is back in stock.
Email us at : sales@acunitsforless.com
Call us at : 678-535-7176
Physical Address : Unit 1284, 2210 Holly Springs Parkway, Holly Springs, Georgia 30142, United States
Goodman GLZS4BA6010 5 Ton 15.2 SEER2 R32 Heat Pump Condenser
Regular Price: $4,413.00
Sale Price: $2,956.71
You save: 33% ($1,456.29 )
Goodman GLZS4BA6010 5 Ton 15.2 SEER2 R32 Heat Pump Condenser is backordered and will ship as soon as it is back in stock.
Once you place an order on AC units for less, we will promptly reach out to express our gratitude for your purchase and address any inquiries you may have. Our team will also review your order with you to ensure that you have selected the right equipment for your specific needs.
Our order process includes a handling or production time in addition to the transit time. Delivery time = handling time + transit time.
All the products undergo a production process, so there will be a handling time of 2–3 business days from Monday to Friday. If your order is placed and payment is received after 2 p.m., then we will process the order the next business day.
Our shipping providers take 3-4 business days to deliver the order. It's an estimate, so there might be a delay.
We primarily use UPS or FEDEX for our deliveries. However, we reserve the right to use other carrier services as required to ensure efficient delivery. After an order ships, the shipping carrier will contact customers to coordinate the delivery schedule.
Once an order has been processed and shipped, it's important to note that the shipping address cannot be altered. Items designated for pickup at the terminal will only be released to the individual listed on the shipping label. A valid driver's license and a signature will be required for the release of the shipment. We adhere strictly to this policy, with no exceptions.
We offer free shipping on all orders except for Flat Bed Shipping or Oversized items. Flat Bed Freight Shipping applies to units larger than 7.5 tons. These items will be delivered via flat bed truck and may require additional delivery coordination. Flat rate charges will be shown at checkout for eligible item. Hot Point PTAC items if ordered under 8 Units different freight is charged
At ACUnitsForLess.com, we are committed to providing our customers with a superior buying experience. We offer free crating to safeguard your equipment during transit, thus eliminating any concerns regarding damage. When you compare our shipping policy to that of our competitors, you'll notice the difference. Customers are not held accountable for any damage to their orders.
Please make your purchase with confidence, knowing that we will ensure you receive the correct equipment that is brand new and in perfect condition.
How do I handle a return shipment?
You may return your unopened order within 60 days for a refund, minus shipping costs and a 25% restocking fee. Customers will be responsible for return shipping costs. Please keep your original box for shipping.
All orders cancelled after 6 hours from the confirmation email will follow the return process, whether or not your order has been shipped. If your order has shipped, you (the buyer) will also be responsible for return shipping charges. Refunds will be issued to the original credit card.
However, if you cancel the order before 6 hours, we will refund your full money.
To process the cancellation, please call us at +1 678-535-7176. We will not be available on Saturday and Sunday, so if somehow you have purchased a product on these days, then contact us on Monday before 3 pm.
If you need any help, feel free to contact us
Address : Unit 1284, 2210 Holly Springs Parkway, Holly Springs, Georgia, 30142, United States
E-Mail: sales@acunitsforless.com
Phone: +1 678-535-7176
Customer Service: Monday to Friday between 9:00 am to 5:00 pm.
If you are not entirely happy with your purchase, you can return your item/s within 60 days of delivery for a full refund of the original payment.
Once we have received the product(s) and, if appropriate, any packaging, a refund will be credited to the payment card account within two weeks; please note that it may take up to 3 days for your bank to credit your account. We are not liable and cannot take responsibility for any bank charges you may incur during the refund process.
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. In this case, we will cover the cost of return shipping as well as we will not charge any restocking fee.
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item. The cost of return shipping is the responsibility of the customer if you want to Exchange. Also we will charge 25% restocking fee.
Your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging to be eligible for a return. You’ll also need the receipt or proof of purchase.
The following items are not eligible for return:
The cost of return shipping is the responsibility of the customer, except in the case of items that were damaged in transit. In that case, we will cover the cost of return shipping.
We charge 25% Restocking Fee, except product got damaged by carrier.
To start a return, you can contact us at sales@acunitsforless.com. If your return is accepted, we’ll send you a return shipping label and instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
An order that has shipped cannot be cancelled. If you refuse an order which has already been shipped, not due to damage, you will be responsible for paying an ORDER RETURN FEE. We incur a fee from the freight carrier to return items that have been shipped, this fee is dependent on the item refused and the destination location.
There are no returns allowed for products which have been specially built for you and shipped by the manufacturer. These items are not routinely stocked at our warehouse and therefore cannot be returned.
By placing an order, the purchaser expressly acknowledges and agrees to the following terms:
1. No Returns or Exchanges
Final sale items are not eligible for return, exchange, substitution, or store credit for any reason, including but not limited to dissatisfaction, incorrect selection, incompatibility, or change of mind.
2. No Refunds
All sales of final sale items are final and non-refundable. Once an order is placed, it cannot be canceled, modified, or refunded.
3. Assumption of Risk
The purchaser assumes full responsibility for determining product suitability, compatibility, and compliance with applicable codes, regulations, and intended use prior to purchase.
4. Condition and Disclaimer
Final sale items are sold “AS IS” and “WITH ALL FAULTS” with no representations or warranties, express or implied, including but not limited to any implied warranties of merchantability, fitness for a particular purpose, or non-infringement, except where prohibited by law.
5. Shipping and Damage Claims
Any damage occurring during transit must be reported in writing within 48 hours of delivery with supporting photographs. Failure to report within this period constitutes acceptance of the product.
6. Chargebacks and Disputes
The purchaser agrees not to initiate any chargebacks or payment disputes related to final sale items. Any chargeback initiated in violation of this policy may be contested with the payment processor using this agreement as evidence.
7. Severability
If any provision of this policy is deemed unenforceable under applicable law, the remaining provisions shall remain in full force and effect.
If you need any help, feel free to contact us
Address: Unit 1284, 2210 Holly Springs Parkway, Holly Springs, Georgia, 30142, United States
E-Mail: sales@acunitsforless.com
Phone: +1 678-535-7176
Customer Service: Monday to Friday between 9:00 am to 5:00 pm.
We provide a 60-day return policy for your convenience. To initiate a return, it is essential that the items remain unused and in their original manufacturer's packaging. When returning the equipment, please ensure that you reuse all shipping materials that were initially used to protect the equipment during shipment.
We will provide the return label.
Upon receiving your return, we will issue a refund for the full order amount, minus the return shipping cost and a 25% restocking fee.
By placing an order, the purchaser expressly acknowledges and agrees to the following terms:
1. No Returns or Exchanges
Final sale items are not eligible for return, exchange, substitution, or store credit for any reason, including but not limited to dissatisfaction, incorrect selection, incompatibility, or change of mind.
2. No Refunds
All sales of final sale items are final and non-refundable. Once an order is placed, it cannot be canceled, modified, or refunded.
3. Assumption of Risk
The purchaser assumes full responsibility for determining product suitability, compatibility, and compliance with applicable codes, regulations, and intended use prior to purchase.
4. Condition and Disclaimer
Final sale items are sold “AS IS” and “WITH ALL FAULTS” with no representations or warranties, express or implied, including but not limited to any implied warranties of merchantability, fitness for a particular purpose, or non-infringement, except where prohibited by law.
5. Shipping and Damage Claims
Any damage occurring during transit must be reported in writing within 48 hours of delivery with supporting photographs. Failure to report within this period constitutes acceptance of the product.
6. Chargebacks and Disputes
The purchaser agrees not to initiate any chargebacks or payment disputes related to final sale items. Any chargeback initiated in violation of this policy may be contested with the payment processor using this agreement as evidence.
7. Severability
If any provision of this policy is deemed unenforceable under applicable law, the remaining provisions shall remain in full force and effect.
IMPORTANT: HVAC and Water Heater parts and accessories should only be installed by qualified technicians. Failure to understand and follow the manufacturer’s installation and use instructions may result in fire or explosion, electric shock, property damage, injury or loss of life. It is your responsibility to seek professional advice when installing and using these parts and accessories.
This 15.2 SEER2 heat pump supplies electric heating and cooling for larger residential spaces when paired with compatible indoor equipment. Its nominal capacity is 60,000 BTUs.
The Goodman 5 ton heat pump uses a single-stage scroll compressor. That straightforward design provides steady output without the added controls found in variable-capacity equipment.
Built as an R32 heat pump condenser, the outdoor unit also includes factory-fitted protective components and a sturdy cabinet made for year-round outdoor conditions.
The Goodman 5 ton heat pump provides a nominal cooling output of 60,000 BTUs and an equal nominal heating output. Its higher capacity makes it suitable for spacious homes with correctly sized ductwork.
The 15.2 SEER2 heat pump reaches its listed efficiency as part of an approved equipment combination. The exact SEER2 and HSPF2 ratings can change depending on the indoor coil or air handler matched with the condenser.
The R32 heat pump condenser includes SmartShift® technology, which manages defrost operation during cold-weather cycles. A steel louver coil guard helps protect the coil while allowing air to move through the cabinet.
The Goodman 5 ton heat pump combines high-capacity output with simple single-stage operation.
High-efficiency single-stage scroll compressor
60,000 BTU nominal cooling output
60,000 BTU nominal heating output
15.2 SEER2 heat pump efficiency
7.8 HSPF2, depending on the matched system
R32 heat pump condenser configuration
SmartShift® defrost technology
Single-speed condenser fan motor
Factory-installed bi-flow liquid-line filter drier
Factory-installed suction-line accumulator
Factory-installed compressor crankcase heater
Factory-installed high-capacity muffler
High- and low-pressure switches
Copper tubing with an enhanced aluminum-fin coil
Factory refrigerant charge for up to 15 feet of tubing
And with an outdoor sound rating of approximately 75 dBA, the Goodman 5 ton heat pump gives buyers a clear figure to compare against other high-capacity models.
|
Specification |
Details |
|
Brand |
Goodman |
|
Model/SKU |
GLZS4BA6010 |
|
Equipment Type |
Split-system outdoor heat pump |
|
Nominal Capacity |
5 tons |
|
Nominal Cooling Capacity |
60,000 BTU |
|
Nominal Heating Capacity |
60,000 BTU |
|
Cooling Efficiency |
15.2 SEER2 |
|
Heating Efficiency |
7.8 HSPF2 |
|
Compressor Type |
Single-stage scroll |
|
Refrigerant |
R32 |
|
Voltage |
208/230V |
|
Phase |
Single phase |
|
Frequency |
60 Hz |
|
Approximate Sound Level |
75 dBA |
|
Liquid Line Connection |
3/8 inch |
|
Suction Line Connection |
1 1/8 inches |
|
Expansion Device |
TXV |
The final performance rating depends on the complete equipment combination. Buyers should verify the selected indoor component through an applicable AHRI-certified match before ordering.
The Goodman 5 ton heat pump uses a square outdoor cabinet measuring 35.5 inches wide and 35.5 inches deep. Its listed cabinet height is 36.5 inches.
Height: 36.5 inches
Width: 35.5 inches
Depth: 35.5 inches
Listed weight: 284 lbs
Nominal capacity: 5 tons
Cooling output: 60,000 BTU
Heating output: 60,000 BTU
The Goodman 5 ton heat pump may suit larger homes covering roughly 2,400 to 3,000 square feet. This range can shift considerably based on climate, insulation, ceiling height, windows, air leakage, and the building’s layout.
The Goodman 5 ton heat pump is intended for buyers who need substantial heating and cooling capacity from one outdoor unit. It works best in larger residential properties that have compatible R32 indoor equipment and ductwork sized for the required airflow.
The Goodman 5 ton heat pump is also a practical choice for buyers who prefer predictable single-stage operation. Its factory-fitted pressure switches, accumulator, and crankcase heater help protect the refrigeration circuit during regular use.
A 5-ton system is too large for many homes, so square footage should never be the only sizing factor. The building’s actual heating and cooling load provides a much better basis for equipment selection.
Q1. What capacity does model GLZS4BA6010 provide?
It provides a nominal 5-ton capacity, equal to approximately 60,000 BTUs for both heating and cooling.
Q2. Is an indoor air handler included with this product?
No. This listing covers the outdoor condenser, which must be paired with compatible R32 indoor equipment.
Q3. Does this unit always achieve 15.2 SEER2?
The published rating depends on the complete equipment combination. Some matched systems may carry a different certified SEER2 rating, so the AHRI match should be checked.
Q4. What are the cabinet dimensions?
The listed dimensions are 36.5 inches high, 35.5 inches wide, and 35.5 inches deep.
Q5. What compressor does this model use?
It uses a single-stage scroll compressor that operates at one primary capacity level.
Full details regarding coverage and terms are available in the Warranty Information PDF.
Download →Register within 60 days of install to activate your Manufacture's warranty.
Register unit →Our technicians are available to assist you Monday – Friday, 8 AM to 5 PM.
409-757-8330 →
We are not liable for any injuries, damages, or losses resulting from improper service or installation of our products. While we strive to provide reliable and high-quality HVAC products, any issues arising from improper handling, installation, or maintenance are the sole responsibility of the installer or service provider. Customers are encouraged to engage qualified professionals for installation and servicing to ensure safety and optimal performance. By purchasing and using our products, customers agree to hold The Acunitsforless Company harmless from any liability related to improper service or installation. It is essential to follow all manufacturer guidelines, industry standards, and local building codes to mitigate risks and ensure safe operation.
Please note that all installations should be performed by a licensed and experienced HVAC professional. Improper installation may result in equipment malfunction, reduced performance, increased energy consumption, and potential safety hazards.
Furthermore, it is essential to understand that any installation not conducted by a qualified HVAC professional may result in the voiding of warranty coverage. Manufacturers typically require installations to be carried out by certified technicians to uphold warranty terms and conditions.
By choosing to have your HVAC systems installed by a qualified professional, you not only protect your investment but also ensure the optimal performance and safety of your heating, ventilation, and air conditioning systems while maintaining warranty coverage.
When businesses begin shopping for commercial standby generators, one of the first decisions is capacity. Should you buy an 80kW generator? 100kW? 150kW? 200kW? The temptation is to match generator...
Prasad Goswami |
Choosing a standby generator would be easy if every home used electricity the same way. They don't. A homeowner with natural gas heat, a gas water heater and one central...
Prasad Goswami |
VTAC units deliver the same room-by-room comfort as a PTAC without the under-window footprint. See how they work, where they're used, and how to pick the right one.
Prasad Goswami |
Amana and GE are the two names hotel owners and property managers trust most for PTAC installs. See how they compare on warranty coverage, noise, efficiency, and serviceability — and...
Prasad Goswami |
Restaurants and commercial kitchens generate much more heat, smoke, grease, and humidity than typical buildings. Ovens, fryers, grills, and dishwashing equipment produce large amounts of heat and airborne particles that...
Prasad Goswami |
Hotels and apartment buildings require HVAC systems that can provide reliable heating and cooling for multiple rooms while maintaining energy efficiency and comfort. Unlike single family homes these buildings must...
Prasad Goswami |
A distribution pipe in a mini split system is a refrigerant Y-branch fitting that splits flow from one outdoor unit to multiple indoor units. It helps balance refrigerant, simplifies installation,...
Prasad Goswami |
A port adapter in a mini split system is a refrigerant fitting that allows different line sizes or connection types to match properly between indoor units, outdoor condensers, and branch...
Prasad Goswami |
A branch box is a refrigerant distribution component used in Mitsubishi multi-zone mini split and VRF systems. It allows one outdoor unit to connect to multiple indoor units while improving...
Prasad Goswami |
HVAC systems play a critical role in maintaining comfort, air quality, and energy efficiency in homes and commercial buildings. While most people interact with HVAC systems every day, many are...
Prasad Goswami |
Commercial HVAC systems are the backbone of comfort, air quality, and operational efficiency in offices, warehouses, retail spaces, hospitals, and industrial buildings. Whether you are a building owner, property manager,...
Prasad Goswami |
Apartment owners need reliable, cost-effective water heating solutions to keep tenants comfortable and operations efficient. At ACUnitsForLess.com, we supply GE water heaters at wholesale prices, with fast nationwide delivery and...
Prasad Goswami |
This 15.2 SEER2 heat pump supplies electric heating and cooling for larger residential spaces when paired with compatible indoor equipment. Its nominal capacity is 60,000 BTUs.
The Goodman 5 ton heat pump uses a single-stage scroll compressor. That straightforward design provides steady output without the added controls found in variable-capacity equipment.
Built as an R32 heat pump condenser, the outdoor unit also includes factory-fitted protective components and a sturdy cabinet made for year-round outdoor conditions.
The Goodman 5 ton heat pump provides a nominal cooling output of 60,000 BTUs and an equal nominal heating output. Its higher capacity makes it suitable for spacious homes with correctly sized ductwork.
The 15.2 SEER2 heat pump reaches its listed efficiency as part of an approved equipment combination. The exact SEER2 and HSPF2 ratings can change depending on the indoor coil or air handler matched with the condenser.
The R32 heat pump condenser includes SmartShift® technology, which manages defrost operation during cold-weather cycles. A steel louver coil guard helps protect the coil while allowing air to move through the cabinet.
The Goodman 5 ton heat pump combines high-capacity output with simple single-stage operation.
High-efficiency single-stage scroll compressor
60,000 BTU nominal cooling output
60,000 BTU nominal heating output
15.2 SEER2 heat pump efficiency
7.8 HSPF2, depending on the matched system
R32 heat pump condenser configuration
SmartShift® defrost technology
Single-speed condenser fan motor
Factory-installed bi-flow liquid-line filter drier
Factory-installed suction-line accumulator
Factory-installed compressor crankcase heater
Factory-installed high-capacity muffler
High- and low-pressure switches
Copper tubing with an enhanced aluminum-fin coil
Factory refrigerant charge for up to 15 feet of tubing
And with an outdoor sound rating of approximately 75 dBA, the Goodman 5 ton heat pump gives buyers a clear figure to compare against other high-capacity models.
|
Specification |
Details |
|
Brand |
Goodman |
|
Model/SKU |
GLZS4BA6010 |
|
Equipment Type |
Split-system outdoor heat pump |
|
Nominal Capacity |
5 tons |
|
Nominal Cooling Capacity |
60,000 BTU |
|
Nominal Heating Capacity |
60,000 BTU |
|
Cooling Efficiency |
15.2 SEER2 |
|
Heating Efficiency |
7.8 HSPF2 |
|
Compressor Type |
Single-stage scroll |
|
Refrigerant |
R32 |
|
Voltage |
208/230V |
|
Phase |
Single phase |
|
Frequency |
60 Hz |
|
Approximate Sound Level |
75 dBA |
|
Liquid Line Connection |
3/8 inch |
|
Suction Line Connection |
1 1/8 inches |
|
Expansion Device |
TXV |
The final performance rating depends on the complete equipment combination. Buyers should verify the selected indoor component through an applicable AHRI-certified match before ordering.
The Goodman 5 ton heat pump uses a square outdoor cabinet measuring 35.5 inches wide and 35.5 inches deep. Its listed cabinet height is 36.5 inches.
Height: 36.5 inches
Width: 35.5 inches
Depth: 35.5 inches
Listed weight: 284 lbs
Nominal capacity: 5 tons
Cooling output: 60,000 BTU
Heating output: 60,000 BTU
The Goodman 5 ton heat pump may suit larger homes covering roughly 2,400 to 3,000 square feet. This range can shift considerably based on climate, insulation, ceiling height, windows, air leakage, and the building’s layout.
The Goodman 5 ton heat pump is intended for buyers who need substantial heating and cooling capacity from one outdoor unit. It works best in larger residential properties that have compatible R32 indoor equipment and ductwork sized for the required airflow.
The Goodman 5 ton heat pump is also a practical choice for buyers who prefer predictable single-stage operation. Its factory-fitted pressure switches, accumulator, and crankcase heater help protect the refrigeration circuit during regular use.
A 5-ton system is too large for many homes, so square footage should never be the only sizing factor. The building’s actual heating and cooling load provides a much better basis for equipment selection.
Q1. What capacity does model GLZS4BA6010 provide?
It provides a nominal 5-ton capacity, equal to approximately 60,000 BTUs for both heating and cooling.
Q2. Is an indoor air handler included with this product?
No. This listing covers the outdoor condenser, which must be paired with compatible R32 indoor equipment.
Q3. Does this unit always achieve 15.2 SEER2?
The published rating depends on the complete equipment combination. Some matched systems may carry a different certified SEER2 rating, so the AHRI match should be checked.
Q4. What are the cabinet dimensions?
The listed dimensions are 36.5 inches high, 35.5 inches wide, and 35.5 inches deep.
Q5. What compressor does this model use?
It uses a single-stage scroll compressor that operates at one primary capacity level.
