πŸŽ‰ Pre-Black Friday Sale! Get 5% OFF Orders Over $2,000 | Shop Now & Save More! πŸŽ‰

View as

    Mitsubishi Single Zone Floor Mount Heat Pump Systems

    (4 products)

    Some rooms simply don't have a good spot high on the wall. Think of an attic bedroom with sloped ceilings, a sunroom that's mostly glass, or a room where the only open space sits below a window. A Mitsubishi Single Zone Floor Mount Heat Pump is made for rooms like these. It sits low, near the floor, about where an old radiator would be, and heats and cools the room from there.

    Mitsubishi's MFZ-KX floor mounted indoor unit pairs with an SUZ outdoor heat pump to create a one room system. It comes in several sizes, with standard and Hyper-Heating versions available. For a small bedroom or office up to about 400 square feet, theΒ Mitsubishi MFZ-KX09NL SUZ-AA09NL 9,000 BTU 21.6 SEER2 is a common pick.

    β€’ Β  Sits low on the wall where high mounting isn't possible

    β€’ Β  Heating and cooling for one room

    β€’ Β  Standard and Hyper-Heating versions available

    How a Floor Mount Heat Pump Works

    The indoor unit sits on the floor or a few inches above it, against the wall. A refrigerant line set connects it to the outdoor unit, with no ductwork involved. Mitsubishi also gives it a removable base, so the unit can be recessed partly into the wall for a slimmer profile.

    Placement near the floor is a real advantage for heating. Warm air comes out low and rises naturally through the room, much like a baseboard heater or radiator. The multi-flow vane can send air from both the top and bottom of the unit, which helps warm the room faster on cold mornings.

    Why Choose Floor Mount Over Wall Mount

    Wall units need open space up high. Floor units don't. They also make sense in rooms where you want heat right at foot level, and they're easy to reach for cleaning since the filter comes out through the front panel.

    β€’ Β  Works under windows and on knee walls

    β€’ Β  Low placement helps warm air rise evenly

    Where a Mitsubishi Single Zone Floor Mount Heat Pump Fits Best

    Attic bedrooms, bonus rooms, sunrooms, older homes where radiators used to sit, and rooms with large windows are all common spots. A Mitsubishi Single Zone Floor Mount Heat Pump also works well in basements and additions where wall space is limited up top. For a medium size room up to about 500 square feet, theΒ Mitsubishi MFZ-KX12NL SUZ-AA12NL 12,000 BTU 19.6 SEER2 is a good match.

    If you live somewhere with hard winters, the Hyper-Heating versions keep heating strong in serious cold. That makes a Mitsubishi Single Zone Floor Mount Heat Pump a realistic main heat source for its room, not just a helper.

    Getting the Size Right

    Start with square footage, then think about the room itself. A sunroom with glass on three sides loses heat fast in winter and gains a lot in summer, so it needs more capacity than a bedroom of the same size. Ceiling height and insulation quality matter too. Oversizing can leave the air feeling damp, so aim for a good match rather than the biggest unit.

    β€’ Β  Adjust for windows, ceiling height, and insulation

    β€’ Β  Avoid oversizing to keep humidity in check

    Key Features of the Floor Mount Lineup

    These units run quietly and include a Nano Platinum filter to help clean the air as it circulates. Wi-Fi is built in on many models, so you can control the system through Mitsubishi's Comfort app. Outdoor units carry Blue Fin anti-corrosion coating, which helps in coastal areas and places with harsh air.

    For larger rooms up to about 750 square feet, theΒ Mitsubishi MFZ-KX18NL SUZ-AA18NL 18,000 BTU 17.2 SEER2 supports long piping runs. Every Mitsubishi Single Zone Floor Mount Heat Pump here uses R454B refrigerant and inverter technology.

    β€’ Β  Nano Platinum filter for cleaner air

    β€’ Β  Built-in Wi-Fi on many models

    Frequently Asked Questions

    Q1: What is a Mitsubishi Single Zone Floor Mount Heat Pump?

    It's a ductless system with one low mounted indoor unit and one outdoor heat pump that heats and cools a single room.

    Q2: Where does the indoor unit go?

    It sits on the floor or a few inches above it, usually under a window or on a short wall.

    Q3: Is it good for heating?

    Yes. Warm air comes out low and rises naturally, which spreads heat evenly through the room.

    Q4: Is there a cold climate version?

    Yes. Hyper-Heating floor mounted systems are available for strong heating in very cold weather.

    Q5: Can I control it from my phone?

    Yes. Many models have built-in Wi-Fi that works with Mitsubishi's Comfort app.

    Comfort for the Rooms Wall Units Can't Reach

    Awkward rooms deserve real comfort too. Choose the Mitsubishi Single Zone Floor Mount Heat Pump that fits your space, add it to your cart for extra savings, or call 1-866-659-0555 and our team will help you pick the right size.

    best-in-comfort-less-in-price-desktop

    Thank you for Visiting

    Click "Home" to Navigate back to Home Screen

    Compare /3

    Loading...