Briggs & Stratton Power Management Modules help your standby generator do more with the power it has. They watch your biggest appliances and keep them from all running at the same moment. That way, your generator can cover more of your home without getting overloaded during an outage.
What Are Briggs & Stratton Power Management Modules?
Briggs & Stratton Power Management Modules are add-on controls that work with a Symphony power management system. Each module connects to a large appliance, like central air or an electric water heater, and lets the system decide when that appliance can run.
This is what's known as generator load management. Instead of buying a bigger generator to run everything at once, you manage the big loads so they take turns. Your home stays comfortable, and the generator stays within its limits.
These modules are designed to pair with the Symphony switches in the Briggs & Stratton Transfer Switches collection.
How Generator Load Shedding Works
Generator load shedding sounds technical, but the idea is simple. When your home asks for more power than the generator can safely give, the system briefly pauses a lower-priority appliance. Once there's room again, that appliance turns back on.
Picture a summer outage. Your central air is running, and someone starts the electric dryer. Without load management, the generator could get pushed past its limit. With a load shedding module on the AC, the system holds the AC for a few minutes, lets the dryer run, and then brings the AC back once demand drops.
The house stays cool, the laundry gets done, and the generator never strains.
Modules in This Collection
This collection includes four options, each built for a slightly different job.
What's available:
-
Line Voltage Module for Symphony II (71051), NEMA 4 rated, for loads up to 50A
-
Symphony II Low Voltage Remote Module (71052) for managing one load
-
Symphony II Dual Low Voltage Remote Module (71053) for managing two loads
-
Symphony Choice Power Management (6907)
The Symphony II modules pair with Symphony II switches, while Symphony Choice is a separate power management option. Check each product page to confirm it matches your switch.
Line Voltage vs Low Voltage Modules
The main difference comes down to how the module controls the appliance.
Line voltage module:
-
Sits on the power line that feeds the appliance
-
Handles 240V loads up to 50A
-
A good fit for appliances like electric water heaters
Low voltage remote module:
-
Typically works through the appliance's control wiring instead of the main power line
-
Common for central air and heat pump systems controlled by a thermostat
-
Available in single and dual versions
If you're not sure which type an appliance needs, check its wiring and the product details before you choose.
How to Pick the Right Module
Choosing from Briggs & Stratton Power Management Modules starts with your transfer switch and your list of large appliances.
Before you choose:
-
Confirm whether you have a Symphony II or Symphony Choice setup
-
List the big loads you want to manage, like AC, dryers, or water heaters
-
Count how many loads need control
-
Match each appliance to the right load management module
Still picking out a generator? Start with the Briggs & Stratton Residential Standby Generators collection, then add the modules your home needs.
Frequently Asked Questions
Q1. What does a load shedding module do?
A load shedding module controls one large appliance during an outage. When power demand gets too high, it pauses that appliance until the generator has room to run it again.
Q2. Do I need generator load management?
It helps most when your generator is smaller than your home's total demand. Managing large loads lets a smaller generator cover more of your home.
Q3. What's the difference between a line voltage and a low voltage module?
A line voltage module controls the appliance's main power line, up to 50A. A low voltage module typically works through the control wiring, such as a thermostat circuit.
Q4. Can I use a load management module with any transfer switch?
No. The Symphony II modules are designed for Symphony II switches. Check each product page to confirm compatibility with your system.
Q5. How do I choose Briggs & Stratton Power Management Modules?
Start with your transfer switch type, then list the appliances you want to manage and pick a module for each one.
Shop Briggs & Stratton Power Management Modules
Compare the line voltage, low voltage, and Symphony Choice options in this collection and pick the modules that match your switch and your biggest appliances. Smart generator load management lets your backup power go further, so your home stays comfortable through every outage. Add yours to the cart today and get more out of your standby generator.