Goodman 96% AFUE High-Efficiency Furnaces

High-efficiency comfort for a serious cold. Goodman 96% AFUE furnaces are engineered to convert up to 96% of their fuel into usable heat, helping reduce energy use while keeping your home consistently warm. These units are an excellent fit for colder regions or anyone looking to reduce energy waste. With advanced components and quiet performance, this lineup delivers premium heat and peace of mind. Browse available capacities and configurations to find the right match for your home.

Why Choose Goodman 96% AFUE High-Efficiency Furnaces

Goodman 96% AFUE high-efficiency furnaces turn nearly all of the gas they burn into heat, so very little energy escapes through the vent. That gap adds up in northern states where the heater runs for months without a break. Planning to upgrade cooling as well? Browse matched furnace and AC systems built to work together.

What you get with a Goodman high efficiency furnace from this collection:

• Sealed combustion design that draws outside air for the burner

• ECM blower motors that use less electricity than older PSC motors

• Upflow cabinets in several widths to fit most basements and utility closets

• Heating capacities from 30,000 to 120,000 BTU

Goodman 96 AFUE Furnace Series Explained

All Goodman 96% AFUE high-efficiency furnaces on this page share the same efficiency rating. The difference between series comes down to how the burner and blower run during a heating cycle.

GR9S Single-Stage Models

• Burner fires at full capacity each time the thermostat calls for heat

• Multi-speed ECM blower keeps power use low

• A dependable Goodman high efficiency furnace for homes in moderate winter climates

GR9T Two-Stage Models

A Goodman 96 2 stage furnace runs on a lower flame for most of the day and moves to high fire only when the temperature drops hard.

• Longer, gentler cycles with fewer cold spots

• Quieter operation than single-stage models

GRVT and GRVS Variable Speed Models

If quiet airflow matters most, look at a Goodman furnace variable speed model. The GRVT and GRVS blowers ramp up slowly and adjust in small steps.

• Very steady temperatures from room to room

• Improved summer humidity control when paired with a central AC

California Models (U Suffix)

Units ending in "U" meet the ultra-low NOx rules set by California air districts. These Goodman 96 furnace models ship only to California addresses.

Sizing Goodman 96% AFUE High-Efficiency Furnaces

Square footage is only a starting point. Your heating load also depends on insulation, window area, ceiling height and local winter temperatures. The HVAC sizing estimator gives you a quick starting size for your Goodman 96 furnace, and a Manual J load calculation confirms the exact figure.

80,000 BTU Models

For many mid-size homes, an 80,000 BTU furnace with 96% efficiency is the most common fit. Both single-stage and two-stage versions are available at this capacity. Compare every model at that size in the 80,000 BTU furnace collection.

100,000 BTU Models

Larger homes and colder zones often need more output. A Goodman 100,000 BTU furnace covers bigger square footage without running nonstop. See all options in the 100,000 BTU furnace collection.

96% AFUE vs 80% AFUE

A standard 80% furnace sends about a fifth of its fuel energy up the flue as hot exhaust. A 96% model adds a second heat exchanger that cools the exhaust until its water vapor condenses, releasing extra heat into your home instead of outdoors. In cold regions where the heater runs for months, that difference adds up over every season.

Key Features of Goodman 96% AFUE High-Efficiency Furnaces

Every model in this lineup is a condensing furnace built for long heating seasons. Common features include:

• A stainless steel secondary heat exchanger built for condensing operation

• Self-diagnostic control boards with LED fault codes

• Insulated cabinets that keep burner and blower noise low

Frequently Asked Questions

Q1. Are Goodman 96% AFUE high-efficiency furnaces worth it?

For homes in cold climates, yes. The higher efficiency means less wasted fuel over each heating season, and the sealed combustion design keeps indoor air out of the burner.

Q2. Is a Goodman 96 2 stage furnace worth it?

For cold climates or homes with uneven temperatures, yes. It spends most of its run time on low fire, which gives steadier heat and quieter operation than a single-stage model.

Q3. Is an 80,000 BTU furnace with 96% efficiency big enough for my home?

It suits many mid-size homes, but the right size depends on your home's heat loss. Start with the sizing estimator. Bigger or colder homes often need a Goodman 100,000 BTU furnace instead.

Q4. Does a Goodman 96 AFUE furnace work with a central AC?

Yes. The furnace blower moves air for both heating and cooling, so it pairs with a matching evaporator coil and outdoor AC unit.

Q5. Which thermostat works best with a Goodman furnace variable speed model?

A two-stage compatible thermostat lets two-stage and variable speed units use their low fire setting. Single-stage models work with most standard thermostats.

Shop Goodman 96% AFUE High-Efficiency Furnaces Today

Winter does not wait, and neither should your comfort. Every unit in this collection is in stock right now, from compact 30,000 BTU models to powerful 120,000 BTU units built for the coldest climates.

• Filter results by BTU, burner stage and cabinet width

• Compare models side by side before you decide

• Add your furnace to the cart today and lock in your pick before peak heating season

Find the right Goodman 96 furnace for your home now and get ready for a warmer, more efficient winter.