Discounts Available | Add to Cart for your Savings | Damos la bienvenida a hablantes de español | Authorized Dealer | B2B program
Daikin NEXIO MAX 12 Ton Light Commercial Inverter Packaged Heat Pump 460V 3-Phase R-32 | DVH1204D000001S is backordered and will ship as soon as it is back in stock.
Email us at : sales@acunitsforless.com
Call us at : 678-535-7176
Physical Address : Unit 1284, 2210 Holly Springs Parkway, Holly Springs, Georgia 30142, United States
Daikin NEXIO MAX 12 Ton Light Commercial Inverter Packaged Heat Pum...
Daikin NEXIO MAX 12 Ton Light Commercial Inverter Packaged Heat Pump 460V 3-Phase R-32 | DVH1204D000001S is backordered and will ship as soon as it is back in stock.
Once you place an order on AC units for less, we will promptly reach out to express our gratitude for your purchase and address any inquiries you may have. Our team will also review your order with you to ensure that you have selected the right equipment for your specific needs.
Our order process includes a handling or production time in addition to the transit time. Delivery time = handling time + transit time.
All the products undergo a production process, so there will be a handling time of 2–3 business days from Monday to Friday. If your order is placed and payment is received after 2 p.m., then we will process the order the next business day.
Our shipping providers take 3-4 business days to deliver the order. It's an estimate, so there might be a delay.
We primarily use UPS or FEDEX for our deliveries. However, we reserve the right to use other carrier services as required to ensure efficient delivery. After an order ships, the shipping carrier will contact customers to coordinate the delivery schedule.
Once an order has been processed and shipped, it's important to note that the shipping address cannot be altered. Items designated for pickup at the terminal will only be released to the individual listed on the shipping label. A valid driver's license and a signature will be required for the release of the shipment. We adhere strictly to this policy, with no exceptions.
We offer free shipping on all orders except for Flat Bed Shipping or Oversized items. Flat Bed Freight Shipping applies to units larger than 7.5 tons. These items will be delivered via flat bed truck and may require additional delivery coordination. Flat rate charges will be shown at checkout for eligible item. Hot Point PTAC items if ordered under 8 Units different freight is charged
At ACUnitsForLess.com, we are committed to providing our customers with a superior buying experience. We offer free crating to safeguard your equipment during transit, thus eliminating any concerns regarding damage. When you compare our shipping policy to that of our competitors, you'll notice the difference. Customers are not held accountable for any damage to their orders.
Please make your purchase with confidence, knowing that we will ensure you receive the correct equipment that is brand new and in perfect condition.
How do I handle a return shipment?
You may return your unopened order within 60 days for a refund, minus shipping costs and a 25% restocking fee. Customers will be responsible for return shipping costs. Please keep your original box for shipping.
All orders cancelled after 6 hours from the confirmation email will follow the return process, whether or not your order has been shipped. If your order has shipped, you (the buyer) will also be responsible for return shipping charges. Refunds will be issued to the original credit card.
However, if you cancel the order before 6 hours, we will refund your full money.
To process the cancellation, please call us at +1 678-535-7176. We will not be available on Saturday and Sunday, so if somehow you have purchased a product on these days, then contact us on Monday before 3 pm.
If you need any help, feel free to contact us
Address : Unit 1284, 2210 Holly Springs Parkway, Holly Springs, Georgia, 30142, United States
E-Mail: sales@acunitsforless.com
Phone: +1 678-535-7176
Customer Service: Monday to Friday between 9:00 am to 5:00 pm.
If you are not entirely happy with your purchase, you can return your item/s within 60 days of delivery for a full refund of the original payment.
Once we have received the product(s) and, if appropriate, any packaging, a refund will be credited to the payment card account within two weeks; please note that it may take up to 3 days for your bank to credit your account. We are not liable and cannot take responsibility for any bank charges you may incur during the refund process.
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. In this case, we will cover the cost of return shipping as well as we will not charge any restocking fee.
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item. The cost of return shipping is the responsibility of the customer if you want to Exchange. Also we will charge 25% restocking fee.
Your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging to be eligible for a return. You’ll also need the receipt or proof of purchase.
The following items are not eligible for return:
The cost of return shipping is the responsibility of the customer, except in the case of items that were damaged in transit. In that case, we will cover the cost of return shipping.
We charge 25% Restocking Fee, except product got damaged by carrier.
To start a return, you can contact us at sales@acunitsforless.com. If your return is accepted, we’ll send you a return shipping label and instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
An order that has shipped cannot be cancelled. If you refuse an order which has already been shipped, not due to damage, you will be responsible for paying an ORDER RETURN FEE. We incur a fee from the freight carrier to return items that have been shipped, this fee is dependent on the item refused and the destination location.
There are no returns allowed for products which have been specially built for you and shipped by the manufacturer. These items are not routinely stocked at our warehouse and therefore cannot be returned.
By placing an order, the purchaser expressly acknowledges and agrees to the following terms:
1. No Returns or Exchanges
Final sale items are not eligible for return, exchange, substitution, or store credit for any reason, including but not limited to dissatisfaction, incorrect selection, incompatibility, or change of mind.
2. No Refunds
All sales of final sale items are final and non-refundable. Once an order is placed, it cannot be canceled, modified, or refunded.
3. Assumption of Risk
The purchaser assumes full responsibility for determining product suitability, compatibility, and compliance with applicable codes, regulations, and intended use prior to purchase.
4. Condition and Disclaimer
Final sale items are sold “AS IS” and “WITH ALL FAULTS” with no representations or warranties, express or implied, including but not limited to any implied warranties of merchantability, fitness for a particular purpose, or non-infringement, except where prohibited by law.
5. Shipping and Damage Claims
Any damage occurring during transit must be reported in writing within 48 hours of delivery with supporting photographs. Failure to report within this period constitutes acceptance of the product.
6. Chargebacks and Disputes
The purchaser agrees not to initiate any chargebacks or payment disputes related to final sale items. Any chargeback initiated in violation of this policy may be contested with the payment processor using this agreement as evidence.
7. Severability
If any provision of this policy is deemed unenforceable under applicable law, the remaining provisions shall remain in full force and effect.
If you need any help, feel free to contact us
Address: Unit 1284, 2210 Holly Springs Parkway, Holly Springs, Georgia, 30142, United States
E-Mail: sales@acunitsforless.com
Phone: +1 678-535-7176
Customer Service: Monday to Friday between 9:00 am to 5:00 pm.
We provide a 60-day return policy for your convenience. To initiate a return, it is essential that the items remain unused and in their original manufacturer's packaging. When returning the equipment, please ensure that you reuse all shipping materials that were initially used to protect the equipment during shipment.
We will provide the return label.
Upon receiving your return, we will issue a refund for the full order amount, minus the return shipping cost and a 25% restocking fee.
By placing an order, the purchaser expressly acknowledges and agrees to the following terms:
1. No Returns or Exchanges
Final sale items are not eligible for return, exchange, substitution, or store credit for any reason, including but not limited to dissatisfaction, incorrect selection, incompatibility, or change of mind.
2. No Refunds
All sales of final sale items are final and non-refundable. Once an order is placed, it cannot be canceled, modified, or refunded.
3. Assumption of Risk
The purchaser assumes full responsibility for determining product suitability, compatibility, and compliance with applicable codes, regulations, and intended use prior to purchase.
4. Condition and Disclaimer
Final sale items are sold “AS IS” and “WITH ALL FAULTS” with no representations or warranties, express or implied, including but not limited to any implied warranties of merchantability, fitness for a particular purpose, or non-infringement, except where prohibited by law.
5. Shipping and Damage Claims
Any damage occurring during transit must be reported in writing within 48 hours of delivery with supporting photographs. Failure to report within this period constitutes acceptance of the product.
6. Chargebacks and Disputes
The purchaser agrees not to initiate any chargebacks or payment disputes related to final sale items. Any chargeback initiated in violation of this policy may be contested with the payment processor using this agreement as evidence.
7. Severability
If any provision of this policy is deemed unenforceable under applicable law, the remaining provisions shall remain in full force and effect.
IMPORTANT: HVAC and Water Heater parts and accessories should only be installed by qualified technicians. Failure to understand and follow the manufacturer’s installation and use instructions may result in fire or explosion, electric shock, property damage, injury or loss of life. It is your responsibility to seek professional advice when installing and using these parts and accessories.
The Daikin NEXIO MAX DVH1204D000001S is a 12 ton (114,000 BTU) light commercial inverter packaged heat pump from the DV Series configured for 460V, 3-Phase, 60 Hz electrical service — the largest capacity unit in the initial NEXIO MAX DV Series release, now in the 460V configuration preferred by larger commercial buildings, industrial properties, and multi-tenant facilities with established 460V distribution infrastructure. It delivers 21.5 IEER / 12.1 EER efficiency from a single variable-speed scroll inverter compressor on R-32 refrigerant, with the same performance as the 208/230V DVH1203D at substantially reduced ampacity requirements.
At 460V, the minimum circuit ampacity drops to 26.5A and maximum overcurrent protection to 35A — compared to 54.0A MCA and 70A overcurrent on the 208/230V counterpart. For electrical contractors and building owners managing panel capacity on larger commercial projects, this reduction in current draw simplifies wire sizing, reduces conduit fill, and eases breaker allocation without any trade-off in heating or cooling performance.
At 12 tons, the inverter compressor's ability to modulate down during part-load conditions has a pronounced impact on both energy cost and occupant comfort. Rather than staging on at full capacity and short-cycling, the unit continuously adjusts output to match actual demand — maintaining a stable setpoint across variable occupancy loads that are characteristic of retail, restaurant, office, and education environments. A subcooling heat exchanger, vapor-injection solenoid, and electronic expansion valves across both indoor and outdoor coils optimize the refrigerant circuit in all operating modes: cooling, heating, defrost, oil return, and hot gas reheat on HGRH-configured models.
The indoor section delivers 3,600 CFM nominal airflow — the highest in the DV Series initial lineup — through a direct-drive 7/8 HP blower at 7.2A FLA, supporting up to 1.4 in. W.C. external static pressure in standard configuration. A dedicated BACnet PCB is physically installed in the indoor control panel as standard, providing native BACnet MS/TP building automation integration without any field-add hardware.
This unit ships to all 48 contiguous states via LTL freight from AC Units for Less, an authorized Daikin dealer. Contractor and B2B pricing available at business.acunitsforless.com. Call 678-535-7176 for lead times, freight quotes, or spec support.
Spec Table
| Specification | DVH1204D000001S |
|---|---|
| Series | Daikin NEXIO MAX (DV Series) |
| System Type | Inverter Packaged Heat Pump |
| Cooling Capacity | 114,000 BTU/H (12 Tons) |
| Efficiency | 21.5 IEER / 12.1 EER |
| Refrigerant | R-32 |
| Refrigerant Charge | 335 oz. |
| Voltage | 460V – 3 Phase – 60 Hz |
| Min. Circuit Ampacity (MCA) | 26.5A |
| Max. Overcurrent Protection | 35A |
| Compressor | 1 / Scroll / Inverter Variable-Speed |
| Indoor Nominal CFM | 3,600 |
| Indoor Motor HP | 7/8 |
| Indoor Blower FLA | 7.2A |
| Max External Static Pressure | 1.4 in. W.C. (Standard ESP) |
| Evaporator Coil Face Area | 16.6 sq. ft. |
| Evaporator Coil Configuration | 4 Rows Deep / 16 Fins per Inch |
| Condenser Fan Motors | 2 |
| Condenser Fan Diameter / Blades | 21.3 in. / 3 Blades |
| Condenser Coil Face Area | 27.0 sq. ft. |
| Condenser Coil Configuration | 3 Rows Deep / 16 Fins per Inch |
| Filter Sizes | (2) 20×25×2 in. + (2) 25×25×2 in. |
| Drain Connection | 3/4 in. NPT |
| Power Supply Conduit Hole | 1.375 in. diameter |
| Low-Voltage Conduit Hole | 0.5 in. diameter |
| Connectivity | BACnet MS/TP (Dedicated PCB, Standard) |
| IoT Platform | Daikin HERO Cloud Services / HERO Pro Edge |
| Operating Weight | 1,293 lbs. |
| Ship Weight | 1,365 lbs. |
| Installation | Rooftop, Horizontal, or Downflow |
| Application | New Construction & Retrofit Curb |
FAQs
Q: What is the difference between the DVH1204D000001S and the DVH1203D000001S?
A: Voltage only. The DVH1204D is configured for 460V, 3-Phase; the DVH1203D runs on 208/230V, 3-Phase. All performance specs are identical — 114,000 BTU, 21.5 IEER, 12.1 EER, 3,600 CFM, 335 oz. R-32 charge, and 1,293 lb. operating weight. The 460V configuration reduces MCA from 54.0A to 26.5A and max overcurrent protection from 70A to 35A.
Q: Why would I specify the 460V model over 208/230V at 12 tons?
A: At 12 tons, the ampacity difference between voltage configurations is meaningful. The DVH1204D draws 26.5A MCA versus 54.0A on the DVH1203D — cutting conductor sizing requirements roughly in half. For buildings with 460V distribution already in place, this simplifies the electrical rough-in significantly. On large commercial projects with multiple rooftop units, the cumulative panel capacity savings of specifying 460V across the entire RTU array can be substantial.
Q: What is the IEER efficiency rating?
A: 21.5 IEER / 12.1 EER — identical to the 208/230V DVH1203D and the highest EER rating among the 10 and 12-ton DV Series models. Voltage configuration has no effect on efficiency ratings.
Q: What are the full electrical requirements?
A: 460V, 3-Phase, 60 Hz. Minimum Circuit Ampacity (MCA) is 26.5A and maximum overcurrent protection is 35A — a slight step up from the 460V 7.5 and 10-ton models (both 30A) reflecting the higher capacity. Power supply conduit knockout is 1.375 in. diameter; low-voltage conduit is 0.5 in. diameter.
Q: Is BACnet MS/TP standard on this unit?
A: Yes. All DV Series NEXIO MAX units include a dedicated BACnet PCB physically installed in the indoor control panel as standard. Native BAS integration requires no field-add communication cards regardless of voltage configuration.
Q: What is the indoor blower FLA on the 460V model?
A: 7.2A — the same as the 460V 7.5 and 10-ton models. At 12 tons the 208/230V model also runs 11.7A on the standard ESP configuration, so the 460V reduction to 7.2A is consistent across the DV Series standard-static platform.
Q: Is there a high-static 460V 12-ton version available?
A: Yes — the DVH1204W000001S is the 460V high-static variant rated at 2.0 in. W.C. maximum external static pressure, with a higher-HP indoor blower motor at 10.6A FLA. Contact us at 678-535-7176 to confirm availability.
Q: How does the 12-ton 460V compare to the 10-ton 460V model?
A: The DVH1204D delivers 114,000 BTU and 3,600 CFM versus 102,000 BTU and 3,100 CFM on the DVH1024D. The MCA steps up from 26.0A to 26.5A and max overcurrent protection from 30A to 35A. Cabinet dimensions, operating weight (1,293 lbs.), ship weight (1,365 lbs.), refrigerant charge (335 oz.), coil configuration, and full control architecture are shared across the entire DV Series platform.
Q: What does this unit weigh and how does it ship?
A: Operating weight is 1,293 lbs. and ship weight is 1,365 lbs. — identical across all six standard-ESP DV Series models. Units ship LTL freight to all 48 contiguous states. Call 678-535-7176 for a freight quote before ordering; liftgate and inside delivery options vary by carrier and delivery address.
Q: Where can I buy the Daikin NEXIO MAX DVH1204D000001S?
A: AC Units for Less is an authorized Daikin dealer shipping to all 48 contiguous states. Contractor and B2B pricing is available at business.acunitsforless.com. Call 678-535-7176 for availability, lead times, and freight quotes.
Register within 60 days of install to activate your Manufacture's warranty.
Register unit →Our technicians are available to assist you Monday – Friday, 8 AM to 5 PM.
409-757-8330 →
We are not liable for any injuries, damages, or losses resulting from improper service or installation of our products. While we strive to provide reliable and high-quality HVAC products, any issues arising from improper handling, installation, or maintenance are the sole responsibility of the installer or service provider. Customers are encouraged to engage qualified professionals for installation and servicing to ensure safety and optimal performance. By purchasing and using our products, customers agree to hold The Acunitsforless Company harmless from any liability related to improper service or installation. It is essential to follow all manufacturer guidelines, industry standards, and local building codes to mitigate risks and ensure safe operation.
Please note that all installations should be performed by a licensed and experienced HVAC professional. Improper installation may result in equipment malfunction, reduced performance, increased energy consumption, and potential safety hazards.
Furthermore, it is essential to understand that any installation not conducted by a qualified HVAC professional may result in the voiding of warranty coverage. Manufacturers typically require installations to be carried out by certified technicians to uphold warranty terms and conditions.
By choosing to have your HVAC systems installed by a qualified professional, you not only protect your investment but also ensure the optimal performance and safety of your heating, ventilation, and air conditioning systems while maintaining warranty coverage.
Homeowners searching for a reliable cooling upgrade often land on the Goodman GLXS AC unit because of its balance of build quality and efficiency. The GLXS lineup sits within Goodman's...
Sumit Patel |
Discover why reliable backup power is critical for data centers and mission-critical facilities. Learn how Briggs & Stratton commercial standby generators from 80kW to 200kW and Cooper Corporation natural-gas gensets...
Prasad Goswami |
Discover the Briggs & Stratton PowerProtect lineup of 13kW, 18kW, 22kW and 26kW home standby generators. Learn how to choose the right generator size for your home, understand NGMax technology,...
Prasad Goswami |
Generator interlock kit vs transfer switch—which is right for your home? Learn how both generator connection methods work, their key differences, load-management considerations, and how generator size affects the equipment...
Prasad Goswami |
If you're shopping for a whole-house or commercial standby generator, the cooling system is one of the first forks in the road — and it quietly decides almost everything else...
Prasad Goswami |
A commercial power outage isn't simply inconvenient. It can stop production, shut down HVAC systems, compromise refrigeration, interrupt communications and IT equipment, disable pumps and leave employees or customers without...
Prasad Goswami |
One of the first questions homeowners ask when shopping for a standby generator is simple: Will it run my air conditioner? That's a particularly important question during a summer power...
Prasad Goswami |
When the power goes out, most homeowners don't want to think about extension cords, portable generators, or deciding which appliance gets power next. A properly sized whole-house standby generator can...
Prasad Goswami |
If you've ever asked what is a heat pump and why so many homeowners are switching to one, you're not alone. Heat pumps have quietly become one of the most...
Sumit Patel |
A power outage hits EV owners differently than gas-car owners — you can't just drive to a gas station. Here's why a standby generator is worth considering if you charge...
Prasad Goswami |
GE Zoneline PTAC units are built in Louisville, Kentucky, giving hotels and multifamily properties a domestically manufactured option for room-by-room heating and cooling. Learn why Zoneline remains a top pick...
Prasad Goswami |
The Daikin NEXIO MAX DVH1204D000001S is a 12 ton (114,000 BTU) light commercial inverter packaged heat pump from the DV Series configured for 460V, 3-Phase, 60 Hz electrical service — the largest capacity unit in the initial NEXIO MAX DV Series release, now in the 460V configuration preferred by larger commercial buildings, industrial properties, and multi-tenant facilities with established 460V distribution infrastructure. It delivers 21.5 IEER / 12.1 EER efficiency from a single variable-speed scroll inverter compressor on R-32 refrigerant, with the same performance as the 208/230V DVH1203D at substantially reduced ampacity requirements.
At 460V, the minimum circuit ampacity drops to 26.5A and maximum overcurrent protection to 35A — compared to 54.0A MCA and 70A overcurrent on the 208/230V counterpart. For electrical contractors and building owners managing panel capacity on larger commercial projects, this reduction in current draw simplifies wire sizing, reduces conduit fill, and eases breaker allocation without any trade-off in heating or cooling performance.
At 12 tons, the inverter compressor's ability to modulate down during part-load conditions has a pronounced impact on both energy cost and occupant comfort. Rather than staging on at full capacity and short-cycling, the unit continuously adjusts output to match actual demand — maintaining a stable setpoint across variable occupancy loads that are characteristic of retail, restaurant, office, and education environments. A subcooling heat exchanger, vapor-injection solenoid, and electronic expansion valves across both indoor and outdoor coils optimize the refrigerant circuit in all operating modes: cooling, heating, defrost, oil return, and hot gas reheat on HGRH-configured models.
The indoor section delivers 3,600 CFM nominal airflow — the highest in the DV Series initial lineup — through a direct-drive 7/8 HP blower at 7.2A FLA, supporting up to 1.4 in. W.C. external static pressure in standard configuration. A dedicated BACnet PCB is physically installed in the indoor control panel as standard, providing native BACnet MS/TP building automation integration without any field-add hardware.
This unit ships to all 48 contiguous states via LTL freight from AC Units for Less, an authorized Daikin dealer. Contractor and B2B pricing available at business.acunitsforless.com. Call 678-535-7176 for lead times, freight quotes, or spec support.
Spec Table
| Specification | DVH1204D000001S |
|---|---|
| Series | Daikin NEXIO MAX (DV Series) |
| System Type | Inverter Packaged Heat Pump |
| Cooling Capacity | 114,000 BTU/H (12 Tons) |
| Efficiency | 21.5 IEER / 12.1 EER |
| Refrigerant | R-32 |
| Refrigerant Charge | 335 oz. |
| Voltage | 460V – 3 Phase – 60 Hz |
| Min. Circuit Ampacity (MCA) | 26.5A |
| Max. Overcurrent Protection | 35A |
| Compressor | 1 / Scroll / Inverter Variable-Speed |
| Indoor Nominal CFM | 3,600 |
| Indoor Motor HP | 7/8 |
| Indoor Blower FLA | 7.2A |
| Max External Static Pressure | 1.4 in. W.C. (Standard ESP) |
| Evaporator Coil Face Area | 16.6 sq. ft. |
| Evaporator Coil Configuration | 4 Rows Deep / 16 Fins per Inch |
| Condenser Fan Motors | 2 |
| Condenser Fan Diameter / Blades | 21.3 in. / 3 Blades |
| Condenser Coil Face Area | 27.0 sq. ft. |
| Condenser Coil Configuration | 3 Rows Deep / 16 Fins per Inch |
| Filter Sizes | (2) 20×25×2 in. + (2) 25×25×2 in. |
| Drain Connection | 3/4 in. NPT |
| Power Supply Conduit Hole | 1.375 in. diameter |
| Low-Voltage Conduit Hole | 0.5 in. diameter |
| Connectivity | BACnet MS/TP (Dedicated PCB, Standard) |
| IoT Platform | Daikin HERO Cloud Services / HERO Pro Edge |
| Operating Weight | 1,293 lbs. |
| Ship Weight | 1,365 lbs. |
| Installation | Rooftop, Horizontal, or Downflow |
| Application | New Construction & Retrofit Curb |
FAQs
Q: What is the difference between the DVH1204D000001S and the DVH1203D000001S?
A: Voltage only. The DVH1204D is configured for 460V, 3-Phase; the DVH1203D runs on 208/230V, 3-Phase. All performance specs are identical — 114,000 BTU, 21.5 IEER, 12.1 EER, 3,600 CFM, 335 oz. R-32 charge, and 1,293 lb. operating weight. The 460V configuration reduces MCA from 54.0A to 26.5A and max overcurrent protection from 70A to 35A.
Q: Why would I specify the 460V model over 208/230V at 12 tons?
A: At 12 tons, the ampacity difference between voltage configurations is meaningful. The DVH1204D draws 26.5A MCA versus 54.0A on the DVH1203D — cutting conductor sizing requirements roughly in half. For buildings with 460V distribution already in place, this simplifies the electrical rough-in significantly. On large commercial projects with multiple rooftop units, the cumulative panel capacity savings of specifying 460V across the entire RTU array can be substantial.
Q: What is the IEER efficiency rating?
A: 21.5 IEER / 12.1 EER — identical to the 208/230V DVH1203D and the highest EER rating among the 10 and 12-ton DV Series models. Voltage configuration has no effect on efficiency ratings.
Q: What are the full electrical requirements?
A: 460V, 3-Phase, 60 Hz. Minimum Circuit Ampacity (MCA) is 26.5A and maximum overcurrent protection is 35A — a slight step up from the 460V 7.5 and 10-ton models (both 30A) reflecting the higher capacity. Power supply conduit knockout is 1.375 in. diameter; low-voltage conduit is 0.5 in. diameter.
Q: Is BACnet MS/TP standard on this unit?
A: Yes. All DV Series NEXIO MAX units include a dedicated BACnet PCB physically installed in the indoor control panel as standard. Native BAS integration requires no field-add communication cards regardless of voltage configuration.
Q: What is the indoor blower FLA on the 460V model?
A: 7.2A — the same as the 460V 7.5 and 10-ton models. At 12 tons the 208/230V model also runs 11.7A on the standard ESP configuration, so the 460V reduction to 7.2A is consistent across the DV Series standard-static platform.
Q: Is there a high-static 460V 12-ton version available?
A: Yes — the DVH1204W000001S is the 460V high-static variant rated at 2.0 in. W.C. maximum external static pressure, with a higher-HP indoor blower motor at 10.6A FLA. Contact us at 678-535-7176 to confirm availability.
Q: How does the 12-ton 460V compare to the 10-ton 460V model?
A: The DVH1204D delivers 114,000 BTU and 3,600 CFM versus 102,000 BTU and 3,100 CFM on the DVH1024D. The MCA steps up from 26.0A to 26.5A and max overcurrent protection from 30A to 35A. Cabinet dimensions, operating weight (1,293 lbs.), ship weight (1,365 lbs.), refrigerant charge (335 oz.), coil configuration, and full control architecture are shared across the entire DV Series platform.
Q: What does this unit weigh and how does it ship?
A: Operating weight is 1,293 lbs. and ship weight is 1,365 lbs. — identical across all six standard-ESP DV Series models. Units ship LTL freight to all 48 contiguous states. Call 678-535-7176 for a freight quote before ordering; liftgate and inside delivery options vary by carrier and delivery address.
Q: Where can I buy the Daikin NEXIO MAX DVH1204D000001S?
A: AC Units for Less is an authorized Daikin dealer shipping to all 48 contiguous states. Contractor and B2B pricing is available at business.acunitsforless.com. Call 678-535-7176 for availability, lead times, and freight quotes.
