Discounts Available | Add to Cart for your Savings | Damos la bienvenida a hablantes de español | Authorized Dealer | B2B program

View as

    GE VTAC Air Conditioning Systems

    (16 products)

    Some rooms just don't have a good spot under the window for a through-the-wall unit. GE VTAC air conditioning systems stand inside a closet or small utility space and send heated or cooled air into the room through a short run of ductwork. Guests see a grille and a thermostat, and that's about it. This collection covers GE's Vertical Zoneline lineup, and the rest of the brand's equipment is on our GE brand page.

    What Is a VTAC Unit?

    VTAC stands for vertical terminal air conditioner. It's a self-contained heating and cooling system that stands upright, usually in a closet right next to the space it serves, and connects to the outdoors through a louver in the exterior wall.

    Because it pushes air through ducts instead of blowing straight out the front, it isn't limited to one room. GE says that with proper ducting, a single unit can serve multiple rooms, which makes it a natural fit for suites and small apartments.

    PTAC vs VTAC

    The short version: a PTAC goes through the wall under a window, while a VTAC hides in a closet. PTACs are the simpler choice when the window wall is free. VTAC units take up some closet space, but they keep the equipment out of the room and can feed air to more than one space.

    Plenty of hotels use both, depending on the floor plan. If a through-the-wall unit suits some of your rooms better, have a look at our GE PTAC air conditioners.

    GE Zoneline VTAC Series

    All GE VTAC air conditioning systems in this collection belong to the Vertical Zoneline series. Every GE Zoneline VTAC here falls into one of these groups.

    V10 Electric Heat

    Fixed-speed cooling with electric heat, offered in 9,000, 12,000 and 18,000 BTU. These models run on R-454B refrigerant, include corrosion protection and can connect to GE's SmartHQ WiFi management.

    V11 Inverter Heat Pump

    The V11 uses a variable-speed inverter compressor that adjusts its output to what the room needs. GE rates its heat pump operation down to 0°F outdoors. WiFi is built in, and these units also use R-454B with corrosion protection.

    V12 Inverter with Makeup Air

    The V12 does everything the V11 does and adds makeup air. It brings outdoor air into the room continuously, and when indoor humidity climbs above 50%, it adjusts to dehumidify. Buildings with fresh air requirements usually end up here.

    2-Ton Heat Pump Models

    At 24,000 BTU, these suit larger suites where one unit covers several rooms. There's a standard version and a makeup air version, both on R-454B.

    Choosing GE VTAC Air Conditioning Systems

    Most buyers narrow down GE VTAC air conditioning systems by working through a few questions:

    • What voltage does the building run? Models come in 208/230V and 265V.

    • How much space does each unit serve? Size for every room on the duct run, not just the main one. Options run from 9,000 to 24,000 BTU.

    • Electric heat or heat pump? V10 uses electric heat. V11 and V12 are heat pumps.

    • Do you need fresh air? If code or brand standards call for it, look at the V12.

    Weighing other brands too? Our Amana VTAC units are worth a look.

    Planning Around Your Floor Plan

    With VTAC HVAC equipment, the closet matters as much as the room. Before picking models, note the closet size in each room type, which rooms share a duct run and the voltage on each floor. Grouping similar rooms usually leaves you with two or three models for the whole building, which keeps filters and parts consistent. If you're matching older equipment, you'll also find a few earlier Vertical Zoneline models among our GE VTAC air conditioning systems.

    FAQs

    Q1. What is a VTAC unit used for?

    VTAC HVAC equipment heats and cools individual rooms or suites in hotels, apartments, dorms and senior living buildings, with the unit tucked into a closet instead of under a window.

    Q2. PTAC vs VTAC: which is right for my building?

    If rooms have open wall space under a window and you want the simplest setup, go with a PTAC. If you'd rather keep equipment out of the room or serve more than one space from a single unit, a vertical terminal air conditioner is the better fit.

    Q3. Can one vertical unit serve more than one room?

    Yes. GE says a single unit can serve multiple rooms with proper ducting. Just size it for the combined space.

    best-in-comfort-less-in-price-desktop

    Thank you for Visiting

    Click "Home" to Navigate back to Home Screen

    Compare /3

    Loading...