GE Garbage Disposers

Dinner's done, the plates are stacked and there's a pile of potato peels sitting in the sink. A good disposer turns that into a ten-second job. All GE garbage disposers in this collection are continuous feed models running on standard 120V power, from compact 1/3 HP units to a full 1 HP motor. They're part of the wider GE Appliances range on our GE brand page.

What Is a Continuous Feed Garbage Disposal?

A continuous feed garbage disposal runs for as long as the switch is on, so you can keep scraping food in while it grinds.

Batch feed models are the other option. You load them, put a stopper in place, and only then do they start. Continuous feed is faster for everyday cleanup, while batch feed trades speed for keeping hands and utensils out of the chamber.

The GE Garbage Disposers Lineup

1/3 HP

The GFC320N, GFC325N and GFC365W are the smallest models. They suit light use, small kitchens and apartments.

1/2 HP

The GFC520N, GFC525N and GFC565W step things up. GE recommends 1/2 HP for a household of two to four people, and the GFC525N spins at over 2,600 RPM with a Drain Boost fin that pushes water through to help keep things moving. For a lot of families, a 1/2 HP continuous feed garbage disposal is the sweet spot.

3/4 HP

The GFC720N and GFC765W are built for people who cook most nights. According to GE's spec sheet, the GFC765W runs at over 2,700 RPM, uses stainless steel jam-resistant dual-swivel impellers and includes sound reduction technology. A 3/4 HP continuous feed garbage disposal handles tougher scraps with less fuss.

1 HP

The GFC1020N and GFC1065W carry the biggest motors GE offers here. If you're shopping for a GE 1 HP continuous feed garbage disposal, these are the two to compare.

Corded, Non-Corded or Universal?

The letters at the end of each model number tell you how it connects:

• Non-corded (GFC320N, GFC520N, GFC720N, GFC1020N): No power cord included. These are meant to be hardwired.

• Corded (GFC325N, GFC525N): Comes with a power cord. The GFC525N also includes a 3-bolt adapter kit.

• Universal (GFC365W, GFC565W, GFC765W, GFC1065W): Plug-in cord, and the mount fits existing InSinkErator 3-bolt mounts, so you can swap units without changing the sink hardware.

Choosing GE Garbage Disposers

Picking between GE garbage disposers comes down to a few honest questions:

• How many people are you cooking for? One or two can get by with 1/3 HP. Larger households should start with a 1/2 HP continuous feed garbage disposal.

• How will it connect? Check whether you need a cord, no cord or a universal 3-bolt fit.

• What switch do you have? The GFC765W works with both wall switches and air switches.

GE Appliances also makes the Hotpoint brand. If you're browsing beyond GE, take a look at our GE Hotpoint page.

Match the Motor to Your Kitchen

A couple who mostly eats out and a family of five who cooks every night need very different machines, even if both have the same sink. The couple is fine with 1/3 HP. The family of five will be happier with a 3/4 HP continuous feed garbage disposal or bigger. Think about a normal week in your kitchen, then pick from our GE garbage disposers to fit it. While you're sorting out the under-sink area, our GE water heaters are worth a look too.

FAQs

Q1. What size garbage disposal do I need?

GE recommends 1/2 HP for two to four people. Smaller homes can use 1/3 HP, while big families and frequent cooks do better with 3/4 HP or a GE 1 HP continuous feed garbage disposal.

Q2. What is a continuous feed garbage disposal?

A continuous feed garbage disposal runs while the switch is on, letting you add scraps as it grinds. All GE models here work this way.

Q3. Batch feed vs continuous feed garbage disposal: which is better?

Looking at batch feed vs continuous feed garbage disposal options side by side, continuous feed wins for most kitchens because it's quicker day to day.

Q4. Will GE garbage disposers fit my existing mount?

The universal W models (GFC365W, GFC565W, GFC765W and GFC1065W) fit existing InSinkErator 3-bolt mounts. For other setups, check the mount details on each product listing.